AgentAM: An AI Agent for Spatter- and Defect-Aware Process Optimization in Laser Powder Bed Fusion

概要

Predictive models for laser powder bed fusion (LPBF) are rarely used on the shop floor because querying them requires programming and model-specific knowledge. We present AgentAM, a large language model (LLM) agent that gives process engineers natural-language access to CFD-trained surrogates of spatter and melt pool geometry for SS316L through the Model Context Protocol (MCP). Polynomial surrogates trained on 279 single-track simulations predict melt pool dimensions ($R^2 \geq 0.95$) and spatter volume ($R^2 = 0.83$ on test data) at any power-velocity point in the trained range, and geometric criteria assign each point a geometry-derived defect regime (keyhole, lack of fusion, balling or stable) that matches the regime obtained from the simulated geometry in 93.4% of tracks under cross-validation. The agent selects and parameterizes tools for prediction, process-window scans and constrained optimization. Minimum-spatter optima often sat within 10 $μ$m of the lack-of-fusion boundary; a margin-aware optimizer moved them away from all thresholds and raised the estimated probability of remaining classified Good from 0.94 to 1.00 under an assumed 2% process drift, and from 0.72 to 0.91 when jointly sampled cross-validated geometry residuals were added. About 40-50 well-spread simulations sufficed to reproduce the defect map. To evaluate the agent layer, we introduce a 145-prompt benchmark scored against direct tool calls, plus eight prompts (40 runs) on margin-aware requests. Over the 725 runs of the main benchmark the agent passed the intended inputs in 98.5% of parsing prompts, reported the scored spatter values and defect classes faithfully and met every stated constraint in the 65 feasible optimization runs, within a median 1.0% of the brute-force optimum.

参考リンク

• Paper ↗

リンク先のライセンス・再現性・データ条件をご確認ください。自動分類や実装の目安は保証ではありません。

実装を始めるプロンプト

参考リンクを確認したうえで、次の内容をコピーして利用できます。

# 論文・記事
AgentAM: An AI Agent for Spatter- and Defect-Aware Process Optimization in Laser Powder Bed Fusion

# 概要
Predictive models for laser powder bed fusion (LPBF) are rarely used on the shop floor because querying them requires programming and model-specific knowledge. We present AgentAM, a large language…

# 原典
https://arxiv.org/abs/2611.05171

上記の手法を実装してください。実行前に依存関係とライセンスを確認してください。