Physics-Informed Identification of Tensegrity Prestress across Taut-Slack Transitions

概要

Prestress governs the stability, stiffness, and dynamic behavior of tensegrity structures, but it is not directly observable from sparse structural measurements, and it may decrease during service life. Under strong excitation, the cables may slacken and the dynamics become nonsmooth. Existing identification methods are limited to the taut regime, and physics-informed networks for tensegrities solve only the forward problem of predicting the response from known member parameters. This study formulates the inverse problem. Neural networks are trained on the equation-of-motion residual in constrained Cartesian coordinates, where the mass matrix is constant and the force densities enter linearly. The force densities, damping, and axial stiffness are trainable parameters, and the tension-only cable law is kept. A Fisher-information analysis shows, before inversion, which member parameters a record can determine. The method is tested on simulated planar tensegrity frames with up to five modules and a three-dimensional prism, and on measured records of a biomimetic leg and a full-scale tensegrity simplex. On the one-module frame, the identifiable force densities are recovered within 1.5% from noisy accelerations at half the free coordinates, on records with and without taut-slack transitions. Records with transitions determine members that taut records leave undetermined. On the five-module frame, a 16-cable two-span bridge, the median force-density error rises moderately, to 4.2%. On measured records, an identified spring stiffness is within 0.1% of its independently measured value on average, and the identified simplex prestress at 13 levels agrees with its cable force transducers to 2.9% root-mean-square.

参考リンク

• Paper ↗

リンク先のライセンス・再現性・データ条件をご確認ください。自動分類や実装の目安は保証ではありません。

実装を始めるプロンプト

参考リンクを確認したうえで、次の内容をコピーして利用できます。

# 論文・記事
Physics-Informed Identification of Tensegrity Prestress across Taut-Slack Transitions

# 概要
Prestress governs the stability, stiffness, and dynamic behavior of tensegrity structures, but it is not directly observable from sparse structural measurements, and it may decrease during service…

# 原典
https://arxiv.org/abs/2611.04007

上記の手法を実装してください。実行前に依存関係とライセンスを確認してください。